rack and pinion

1. Rack and pinion gear
   齿条与小齿轮传动装置
2. Rack and pinion press Study on Cold Extruding Forming Technology for the Driving Gear of Saw-tooth Inner Gear
   齿轮齿条传动压力机锯齿形内齿主动齿轮冷挤压成型技术研究
3. Using the new GT series of pneumatic actuators, a double-acting and single acting ( spring return), rack and pinion drive, safe and reliable;
   采用新型系列GT型气动执行器，有双作用式和单作用式（弹簧复位），齿轮齿条传动，安全可靠；
4. Rack and pinion suspension system
   齿轮齿条式悬挂系统
5. Adopted ball bearing movement device, high precision guide liner, rack and pinion and servo motor, insure the stable movement with high precision position and operation.
   高精度直线导轨副、滚柱丝杠、齿轮齿条进口伺服电机，保证运动平稳，有较高定位及加工精度；
6. Rack and pinion mechanism
   齿条-齿轮传动机构
7. X to exercise dual-motor dual rack and pinion drive technology, eliminating the pros and cons to the meshing clearance.
   ③X向运动采用双电机双齿轮齿条驱动技术，消除正反向的啮合间隙。
8. Both gear centers have pinions with only half tooth. The four main types of gears ( spur, helical, worm, and bevel) and a rack and pinion are shown in Figure 7.
   两个齿轮其中心都有一个小齿轮，这个小齿轮只有半边有齿轮。图7所示是四种主要的齿轮（巨齿轮，斜齿轮，蜗轮和伞齿轮）以及齿条和小齿轮。
9. It's a rack and pinion, and a good one at that.
   它有一对齿条和齿轮，而且质量上乘。
10. If the rack is fixed and the pinion is carried in Bearings on a table guided on tracks parallel to the rack, rotation of the pinion shaft will move the table parallel to the rack.
    如果齿条固定，小齿轮装在工作台的轴承上，而工作台所在的导轨与齿条平行，那么小齿轮的轴转动时，就会带动工作台平行齿条而移动。
11. The Virtual Design and Analysis of UG based Rack and Pinion Redirector
    基于UG的齿轮齿条式转向器的虚拟设计与分析
12. Steering: power assisted rack and pinion.
    指导：动力辅助齿轮齿条式。
13. Rack and pinion passenger hoist suspended silo unloader
    齿轮齿条式载人吊重机吊挂式青贮料卸载机
14. Unique twin guide bar feature absorbs rack and pinion load and ensures optimum teeth engagement.
    独特的双导杆具有吸收齿条和齿轮负载的特点，确保齿轮之间能够优化啮合。
15. A Study on Rack and Pinion Steering Gear with Variable Ratio
    变速比齿轮齿条式转向器的共轭分析
16. Rackwork on Gear Shaping Machine Surface Treatment process of Hydraulic Rack Shaft In Rack and Pinion Hydraulic Steering and Parameters Set
    MAAG插齿机的齿条加工齿轮齿条式液压转向机齿条杆部的表面处理工艺及参数设定
17. This paper analyzes why the more fixed-length errors and unstable drive is existed in the pinion and rack drive system of the original flying saw, and expresses that to replace the original pinion and rack drive system can use the worm wheel and worm drive system.
    分析了原飞锯齿轮齿条传动系统存在的定尺误差大及传动不平稳的产生原因，提出了用蜗轮蜗杆传动系统替代原齿轮齿条传动系统。
18. Optimum Design of steering Linkage Adapted to A Rack and Pinion Steering Gear
    与齿轮齿条式转向器配用的转向传动机构优化设计
19. The displacement matrix method was used to analyze the spatial kinematics of the MacPherson strut suspension and steering tie rods in a rack and pinion steering system. Calculational method of the relationship between the inside and outside wheels of the front axle was given.
    在对轿车转向杆系进行优化设计的过程中，运用位移矩阵法对MacPherson式悬架和齿轮齿条式转向系统的转向杆系进行了空间运动学分析，给出了前轴内、外轮转角关系的计算方法。
20. A Study on the Meshing of Rack and Pinion Steering Gear with Variable Ratio ( I)
    汽车变速比齿轮齿条式转向器的啮合原理（Ⅰ）
21. The paper makes a spatial kinematics analysis on the double wishbone suspension as well the rack and ( pinion) steering system, based on which a model for optimization of vehicle steering linkage is constructed.
    对双横臂式独立悬架和齿轮-齿条式转向系统进行了空间运动学分析，在此基础上建立了汽车转向杆系优化设计的数学模型。
22. Trouble Location and Removal of Rack and Pinion Steering
    齿轮&齿条转向机的故障诊断与排除
23. Modeling and Analysis of Rack and Pinion Steering Gear
    齿轮齿条转向器的建模及分析
24. In this paper, the meshing theory of rack and pinion steering gear with variable ratio is studied systematically.
    对汽车变速比齿轮齿条式转向器的啮合原理进行了系统研究。
25. A mathematical model is developed for the design synthesis of rack and pinion steering linkage.
    对齿轮齿条转向连杆机构进行综合与分析并建立数学模型。
26. It includes as following: The modals of servo system, servo motor and mechanical systems, such as ball screw, rack and pinion, and so on, are established.
    其主要内容如下：分析和建立了伺服驱动系统、伺服电机及滚珠丝杠系统等机械结构的数学模型。
27. Rack and pinion steering gear is one of the important components of mini car.
    齿轮齿条式转向器是组成微型轿车关键部件之一。
28. Comprehensive performance test bench for Rack and pinion steering gear is the detecting and evaluating tool, which would not be ignored.
    齿轮齿条式转向器综合性能试验台是检测和评估它的不可忽视的检测工具。
29. The rack and pinion power steering gear of rotary valve has been widely used in the car.
    现代轿车多采用转阀式齿轮齿条液压动力转向器。

noun

1. a wheel gear (the pinion) meshes with a toothed rack